وصف المنتج
ISO/ANSI/DIN Standard Short Pitch Precision Stainless Steel Hardware Transmission Motorcycle Industrial Roller Chain
وصف المنتج
1. Material: Stainless Steel 304 & 316 / Alloy Carbon Steel
2. Surface Treatment: Shot peening / Zinc-plated / Nickel-plated / Dacromet-plated
3. Chain No:
35SS-1, 40SS-1, 50SS-1, 60SS-1, 80SS-1, 100SS-1, 120SS-1, 140SS-1;
35SS-2, 40SS-2, 50SS-2, 60SS-2, 80SS-2, 100SS-2, 120SS-2, 140SS-2;
35SS-3, 40SS-3, 50SS-3, 60SS-3, 80SS-3, 100SS-3, 120SS-3, 140SS-3;
4. Application: Stainless Steel Chains are used in so many industries, such as machine manufacturing, food machine, etc. Also are suitable for high and low temperature conditions.
5. Characteristic:
1. The chain can be used on the both sides of multi-axle transmission.
2. Easy installation and replacement.
3. It can obtain larger reduction ratio.
4. The roller chain has good elasticity, high strength and each hinge part has lubricating oil, so it can be stored easliy. Thus, compared with the rigid contact tooth, it has good cushioning and vibration absorbing ability.
| اسم المنتج | Stainless Steel Roller Chain From China |
| المواد المتاحة | 1. Stainless Steel: SS304, SS316, etc |
| 2. Alloy Steel: 45Mn, 42CrMo, 20CrMo, etc | |
| 3. OEM according to your request | |
| معالجة السطح | Shot peening, Blackening, Oxygenation, Polishing, Zinc-plated, Nickel-plated, Anodized, etc. |
| السمة | Fire Resistant, Oil Resistant, Heat Resistant |
| معيار التصميم | ISO DIN ANSI ورسم العميل |
| مقاس | رسم العميل ومعيار ISO |
| طَرد | صندوق خشبي / حاوية ومنصة نقالة، أو مصنوع حسب الطلب |
| شهادة | ISO9001: 2008 |
| ميزة | جودة ممتازة، خدمة رائعة، سعر تنافسي، توصيل سريع |
| موعد التسليم | 20 days for samples. 45 days for official order. |
صور تفصيلية
View more products,please click here…
نبذة عن الشركة
| الاستخدام: | سلسلة النقل |
|---|---|
| مادة: | الفولاذ المقاوم للصدأ |
| بناء: | سلسلة بكرات |
| 80-1: | 1" |
| مقاس: | 50ss-1 |
| Other: | Corrosion Resistance |
| أمثلة: |
US$ 0/متر
متر واحد (الحد الأدنى للطلب) | |
|---|
| التخصيص: |
متاح
| طلب مخصص |
|---|
What are the benefits of using a low-noise transmission chain?
Using a low-noise transmission chain in industrial applications offers several advantages. Here’s a detailed answer to the question:
1. Noise Reduction: One of the primary benefits of using a low-noise transmission chain is the reduction in noise levels. These chains are designed with special features and materials to minimize vibrations, impact, and friction-induced noise during operation. This is particularly important in environments where noise reduction is critical, such as in residential areas, offices, or noise-sensitive industries.
2. Improved Workplace Environment: By reducing noise levels, low-noise transmission chains contribute to a more comfortable and productive workplace environment. Excessive noise can lead to employee fatigue, decreased concentration, and increased stress levels. Using low-noise chains helps create a quieter workspace, promoting better working conditions and overall well-being.
3. Compliance with Noise Regulations: In certain industries or regions, there are specific regulations or guidelines regarding acceptable noise levels. Using low-noise transmission chains can help ensure compliance with these regulations, avoiding potential fines or legal issues related to excessive noise emissions.
4. Enhanced Equipment Performance: Low-noise transmission chains are designed to provide smooth and efficient power transmission while minimizing noise generation. The reduction in vibration and impact noise not only improves the comfort of the workplace but also enhances the overall performance of the equipment. It can contribute to better precision, accuracy, and reliability of the machinery, leading to improved product quality and operational efficiency.
5. Extended Equipment Lifespan: Excessive noise and vibration can accelerate wear and tear on machinery components, leading to increased maintenance and premature failure. By using a low-noise transmission chain, the impact on the equipment’s mechanical parts is reduced, resulting in less wear, lower maintenance costs, and extended equipment lifespan.
6. Customer Satisfaction: In industries where noise can affect the end-user experience, such as automotive, consumer electronics, or precision engineering, using low-noise transmission chains can contribute to higher customer satisfaction. Products that operate quietly are often perceived as higher quality and can lead to a positive brand image and customer loy alty.
It’s important to note that the benefits of low-noise transmission chains may vary depending on the specific application and operating conditions. Manufacturers and equipment designers should consider factors such as load capacity, speed, lubrication, and environmental requirements when selecting and implementing low-noise transmission chains.
كيف تؤثر سرعة الدوران على اختيار سلسلة النقل؟
تُعد سرعة الدوران عاملاً مهماً يجب مراعاته عند اختيار سلسلة نقل الحركة لتطبيق معين. إليك إجابة مفصلة على السؤال:
1. الإجهاد والتآكل: تؤثر سرعة الدوران بشكل مباشر على خصائص الإجهاد والتآكل لسلسلة نقل الحركة. تؤدي سرعات الدوران العالية إلى زيادة الأحمال الدورية والتآكل على مكونات السلسلة. لذلك، من الضروري اختيار سلسلة مصممة لتحمل السرعة المتوقعة وما يصاحبها من إجهاد.
٢. التشحيم والتبريد: تؤدي السرعات الدورانية العالية إلى توليد حرارة أكبر نتيجة الاحتكاك بين السلسلة والتروس. يُعد التشحيم الكافي ضروريًا لتقليل الاحتكاك، والحد من تراكم الحرارة، والحفاظ على أداء السلسلة وعمرها الافتراضي. بالإضافة إلى ذلك، قد تتطلب بعض التطبيقات عالية السرعة آليات تبريد إضافية لتبديد الحرارة بكفاءة.
3. قوى الطرد المركزي: مع ازدياد سرعة الدوران، تزداد أهمية قوى الطرد المركزي. يمكن لهذه القوى أن تؤثر على استقرار السلسلة، وشدّها، وأدائها العام. صُممت السلاسل المخصصة للتطبيقات عالية السرعة لتحمّل قوى الطرد المركزي المتزايدة والحفاظ على الشدّ المناسب أثناء التشغيل.
4. التوازن الديناميكي: قد يؤدي الدوران عالي السرعة إلى اختلالات ديناميكية في نظام النقل، مما ينتج عنه اهتزازات وانخفاض في كفاءة النظام. لذا، ينبغي إيلاء اهتمام خاص لاختيار سلسلة نقل ذات خصائص توازن ديناميكي مناسبة لتقليل الاهتزازات وضمان التشغيل السلس.
5. المواد والتصميم: غالبًا ما تتطلب السلاسل المستخدمة في التطبيقات عالية السرعة موادًا وخصائص تصميمية محددة لاستيعاب قوى الدوران المتزايدة والحفاظ على موثوقيتها. ويمكن استخدام سبائك عالية القوة، وتفاوتات تصنيع دقيقة، ومعالجات سطحية متطورة لتحسين أداء السلسلة ومتانتها عند السرعات العالية.
عند اختيار سلسلة نقل الحركة، من الضروري مراعاة توصيات الشركة المصنعة ومواصفاتها المتعلقة بالسرعات القصوى المسموح بها. يجب أخذ عوامل مثل متطلبات التشغيل للتطبيق، وسرعة الدوران المتوقعة، والحمل، والظروف البيئية في الاعتبار لضمان ملاءمة السلسلة المختارة للتطبيق المحدد عالي السرعة.
Can transmission chains be used in high-speed applications?
Yes, transmission chains can be used in high-speed applications, but there are certain considerations to take into account. Here’s a detailed explanation:
1. Chain Design: High-speed applications require transmission chains that are specifically designed to withstand the increased rotational speeds and dynamic loads. These chains often have features such as specialized surface treatments, high-quality materials, and precision manufacturing to ensure smooth operation at high speeds.
2. Lubrication: Proper lubrication is crucial in high-speed applications to minimize friction, heat generation, and wear. Lubricants with excellent high-speed characteristics, such as low viscosity and high film strength, are typically recommended. In some cases, specialized lubrication systems, such as oil circulation or spray lubrication, may be used to ensure sufficient lubrication at high speeds.
3. Balancing: High-speed operation can induce vibration and imbalance in transmission chains, leading to increased stress and potential failure. Balancing the chain and associated components, such as sprockets and shafts, is important to minimize vibration and ensure smooth operation at high speeds.
4. Tensioning: Proper tensioning of the transmission chain is crucial in high-speed applications. Maintaining the appropriate tension helps prevent chain slippage, excessive vibration, and premature wear. Tensioning devices, such as automatic tensioners or spring-loaded systems, may be used to ensure optimal tension throughout the operation.
5. Maintenance: Regular inspection, lubrication, and maintenance are vital in high-speed applications to detect any potential issues and address them promptly. Periodic checks for wear, proper alignment, and lubrication effectiveness can help prevent unexpected failures and ensure the reliable performance of transmission chains.
It is important to consult with manufacturers or industry experts to select the appropriate transmission chain that is specifically designed and rated for high-speed applications. By following the recommended guidelines and maintenance practices, transmission chains can reliably and safely operate in high-speed environments, meeting the performance requirements of such applications.
editor by CX 2023-10-25
