Descrição do produto
Fotos detalhadas
Descrição do produto
An overhead conveyor is a type of conveyor system that is installed above the working area, typically in a manufacturing or industrial setting. It is used to move products, materials, or components from 1 point to another in a factory or warehouse, and is particularly useful for transporting heavy or bulky items that are difficult to move manually.
Overhead conveyors are commonly used in a variety of applications, such as automotive assembly lines, food and beverage processing, material handling and distribution, and storage and retrieval systems. They can be used for both horizontal and vertical transportation and can move products along a fixed path or in a continuous loop.
Some specific uses of overhead conveyors include:
-
Assembly line transportation: Overhead conveyors are commonly used in manufacturing assembly lines to transport parts and components to different workstations along the line.
-
Powder coating: Overhead conveyors are used in powder coating operations to move products through a paint booth, where they are coated with a dry powder before being cured in an oven.
| Spare parts item | Características | Photo |
| Up-Down track | for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered. | |
| Check track | There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace. | |
| Take-up device
(Tensioner) |
Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working. Make sure certain tensile force between driver and take-up device. Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. |
|
| Straight track | for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters. | |
| Caterpiller driver device | Two types-Standard type and heavy duty type. The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward. |
|
| Hanger | Several types hangers: Cross type hanger; Y type hanger; I type hanger; Sprocket wheel hanger; U-type hanger; Bearing hanger; Customized. |
|
| Automatic oil sprayer | Specially designed for various automatic conveying chain;
More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes. |
Perguntas frequentes
P1: Vocês são uma empresa comercial ou fabricante?
A: Nós somos uma fábrica.
P2: Qual é o prazo de entrega e envio?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.
P3. Quais são as suas condições de pagamento?
A: T/T 30% como depósito e 70% antes da entrega.
We’ll show you the photos of the products and packages before you pay the balance.
Q4: Quais são as suas vantagens?
1. Fabricante, preço mais competitivo e boa qualidade.
2. Engenheiros técnicos altamente qualificados oferecem o melhor suporte.
3. Fabricação OEM disponível.
4. Grande variedade de produtos em estoque e entrega rápida.
Q5. Se você não encontrar o produto em nosso site, o que deve fazer em seguida?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check
/* 22 de janeiro de 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“”,).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Liga |
|---|---|
| Estrutura: | Combined Chain |
| Tratamento de superfície: | Polimento |
| Personalização: |
Disponível
| Solicitação personalizada |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Custo do frete:
Frete estimado por unidade. |
sobre o custo do frete e o prazo estimado de entrega. |
|---|
| Método de pagamento: |
|
|---|---|
|
Pagamento inicial Pagamento integral |
| Moeda: | US$ |
|---|
| Devoluções e reembolsos: | Você pode solicitar um reembolso em até 30 dias após o recebimento dos produtos. |
|---|
What are the benefits of using a corrosion-resistant coating on a drive chain?
A corrosion-resistant coating provides several benefits when applied to a drive chain. Here is a detailed explanation:
Drive chains used in various applications are often exposed to harsh environments that can lead to corrosion, including moisture, chemicals, contaminants, or high humidity. Applying a corrosion-resistant coating to the chain offers the following advantages:
- Proteção contra corrosão: The primary benefit of a corrosion-resistant coating is its ability to protect the chain from corrosive elements. The coating acts as a barrier, preventing moisture, chemicals, and other corrosive agents from reaching the chain’s surface. This helps to inhibit or slow down the corrosion process, extending the chain’s lifespan and reducing the risk of premature failure.
- Durabilidade aprimorada: By adding a corrosion-resistant coating, the drive chain’s durability is significantly improved. The coating helps to prevent rust, oxidation, and degradation, thereby maintaining the chain’s structural integrity and preserving its mechanical properties. This results in a longer service life and reduces the need for frequent chain replacements.
- Requisitos de manutenção reduzidos: A corrosion-resistant coating reduces the maintenance efforts required to keep the chain in optimal condition. Since the coating provides a protective layer, there is less need for frequent lubrication or cleaning to combat corrosion. This leads to reduced maintenance costs and downtime, contributing to improved operational efficiency.
- Compatibility with Harsh Environments: In applications where the chain is exposed to aggressive chemicals, high humidity, saltwater, or other corrosive substances, a corrosion-resistant coating is essential. The coating ensures the chain’s reliability and performance even in demanding and challenging environments, such as marine, chemical processing, or outdoor applications.
- Promotion of Cleanliness and Hygiene: Some corrosion-resistant coatings are designed to be smooth and easy to clean. This promotes cleanliness and hygiene in applications where cleanliness is critical, such as food processing, pharmaceuticals, or cleanroom environments. The coating prevents the accumulation of contaminants, making the chain easier to clean and maintain compliance with industry regulations.
- Improved Aesthetics: A corrosion-resistant coating can enhance the visual appeal of the chain. It provides a clean and professional appearance, which is particularly important in applications where the chain is visible, such as in architectural designs or decorative installations.
It is important to note that the selection of a suitable corrosion-resistant coating should consider the specific application requirements, environmental conditions, and the compatibility of the coating with the chain material.
Regular inspection and proper maintenance practices, including periodic cleaning and lubrication, are still recommended to ensure the optimal performance and longevity of the drive chain, even with a corrosion-resistant coating.
By using a corrosion-resistant coating on a drive chain, operators can benefit from corrosion protection, enhanced durability, reduced maintenance requirements, compatibility with harsh environments, cleanliness, improved aesthetics, and ultimately, reliable and long-lasting chain performance.
Como se compara a eficiência de uma corrente de transmissão com a de outros sistemas de transmissão de potência?
A eficiência de uma corrente de transmissão pode variar dependendo de fatores como tipo de corrente, projeto, lubrificação e condições de operação. Aqui está uma explicação detalhada de como a eficiência de uma corrente de transmissão se compara à de outros sistemas de transmissão de potência:
- Alta eficiência: As correntes de transmissão são conhecidas pela sua alta eficiência na transmissão de potência. Quando devidamente lubrificadas e mantidas, podem atingir níveis de eficiência de 95% ou superiores, o que significa que uma quantidade mínima de potência é perdida durante a transmissão.
- Comparável a outros sistemas: A eficiência de uma corrente de transmissão é geralmente comparável à de outros sistemas comuns de transmissão de potência, como transmissões por correia e por engrenagens. Cada sistema tem suas próprias vantagens e considerações, e suas eficiências podem ser semelhantes quando operam em condições ideais.
- Fatores que afetam a eficiência: A eficiência de uma corrente de transmissão pode ser influenciada por diversos fatores. Entre eles, o tipo e o projeto da corrente, a condição das rodas dentadas, o nível de lubrificação, o alinhamento do sistema e a tensão da corrente. A seleção, a instalação e a manutenção adequadas desempenham papéis fundamentais para maximizar a eficiência de uma corrente de transmissão.
- Perdas na transmissão de energia: Apesar da sua alta eficiência, as correntes de transmissão sofrem algumas perdas de potência durante o funcionamento. Essas perdas ocorrem devido ao atrito na corrente, ao deslizamento nos pontos de contato entre a corrente e as rodas dentadas e a outros fatores mecânicos. No entanto, essas perdas podem ser minimizadas através da lubrificação e tensionamento adequados da corrente.
Em resumo, as correntes de transmissão oferecem alta eficiência na transmissão de potência, comparável a outros sistemas comuns de transmissão de potência. Ao selecionar o tipo de corrente apropriado, garantir a lubrificação e a manutenção adequadas e otimizar o alinhamento e a tensão do sistema, a eficiência de uma corrente de transmissão pode ser maximizada, resultando em transmissão de potência eficaz e perdas mínimas de potência.
What are the signs of a worn-out drive chain?
A worn-out drive chain can significantly impact the performance and safety of a machine or system. It is important to recognize the signs of a worn-out drive chain to address the issue promptly. Here are some common signs to look out for:
- 1. Chain Elongation: Excessive chain elongation is a clear indication of wear. You can measure chain elongation by comparing the current chain length to its original length. If the chain has elongated beyond the manufacturer’s recommended limit, it is a sign of wear and requires replacement.
- 2. Visible Signs of Wear: Inspect the drive chain for visible signs of wear, such as worn-out or distorted chain links, rollers, or plates. Look for signs of corrosion, pitting, or discoloration, indicating the chain’s deterioration.
- 3. Chain Slack: Excessive chain slack, where the chain visibly sags or has too much play, is an indicator of wear. A properly tensioned chain should have a minimal amount of slack, and excessive slack suggests elongation and a need for replacement.
- 4. Ruído e vibração: A worn-out drive chain often produces increased noise and vibration during operation. If you notice unusual rattling, clanking, or grinding sounds, or if you feel excessive vibrations, it may be a sign of a worn chain.
- 5. Poor Power Transmission: A worn-out chain may struggle to efficiently transfer power, resulting in reduced performance and power loss. You may experience a decrease in acceleration, sluggishness, or difficulty maintaining consistent speed.
- 6. Poor Gear Shifting: In applications where the drive chain is connected to gears, a worn chain can cause difficulties in gear shifting, resulting in jerky or unreliable gear changes.
- 7. Increased Chain Tension: As a chain wears, it may require frequent tension adjustments to maintain proper alignment and operation. If you find yourself frequently adjusting the chain tension, it may be a sign of wear.
If you observe any of these signs, it is recommended to replace the worn-out drive chain promptly to avoid further damage and ensure the safe and efficient operation of the machinery.
editor by CX 2024-04-09
